Hands on with the Christopher Ward C900 Single Pusher Chronograph Timepiece

A Step up for the British based watchmaker….

Written by D Constant for The Watch Review Site

Further to our little sneak peek at the Christopher Ward C900 Monopusher earlier this month we now have the pleasure in bringing you one of the first published ‘hands on reviews’ of this soon to be classic Christopher Ward Timepiece, yes we know it is only on pre-order and not yet released, but if there is a watch that has the qualities and characteristics to be written in the history books, with longevity in design and tweaks in the complication, then the C900 monopusher or single pusher is the timepiece from the Christopher Ward stable that will make it’s mark for a long time on the watch world.  Watch out for it at next years European Watch of the Year awards, I for one will expect to see it there after Christopher Wards Jump Hour was nominated this year.

I’m sure we thanked the guys and girls at Christopher Ward for the loan of the only C900 currently in circulation in the UK in our previous piece but we would like to do it once again, It was a pleasure to be trusted with the Chr.Ward C900 mono pusher even if it was only for 5 days or so. I would just like to point out that the model we had for hands on review was a PR sample produced pre production by Christopher Ward and his ateliers, but have been assured that it is identical to the finished product that is available for pre order on the Christopher ward website now and should be delivered early November 2012.

For our readers that are unaware of what a monopusher or single pusher actually is, well it is what it says, It allows all the functions of a chronograph to be worked by one pusher or crown and is achieved by a complex steps of adjustments to the mechanics of a movement to achieve it. On a normal chronograph you get two separate pushers, a start/stop pusher and a reset pusher, this in its self even though very common mechanically it is still complex. Monopushers are  fairly rare in the watch world and are usually only produced by the top end manufactures leading them to be quite unique and expensive.

So on to the Hands on Review of the C900 Harrison Single Pusher Chronograph (to give the C900 its full name), firstly as you can see its a clean cut design, with its polished stainless steel case and crisp white dial, with long thin baton indicators at the hour points and small ones as minute markers. The only two Roman numerals are at XII (12 o’clock) and VI (6 o’clock) and this plays to the C900’s strong points with the needle like hands and two inner sub dials at 3 and 9 o’clock, these sub dials are large and clear and fit in well with the timepiece. The inner sub dials depict the minutes for your chronograph (3 o’clock) and constant small seconds (9 o’clock) the overall feel of the C900 is clean crisp and effective. At no point did I find it difficult to read the time whilst in normal light conditions but the lack of lume does prohibit the easy reading of the time in very dark environments, but hey who would want to be walking down a darkened alleyway with no street lights looking at your £2,450.00 watch on your wrist, not me that’s for sure…

The black alligator leather strap also fits in perfectly with the dial and overall impression the C900 is trying to achieve, trying may be the incorrect word we should say the impression Christopher have so elegantly managed to achieved with the C900 Monopusher (I cant help it I like calling it Monopusher rather than Single Pusher Sorry). It is also available with a brown alligator strap too.

I would just like to point out that the photo’s of the C900 Harrison Single Pusher (that was for those CW fans who want it called by its official name) may not be our best but due to the time constraints we had we were unable to get our best man on it. One further point on the morning of receipt of the C900 we were made aware of a previous recipient opening the timepiece for some unknown reason and leaving a white hair under the sapphire crystal, so for those of you that see the white line that looks like a crack in the sapphire crystal, its not it is a hair. Someone will be getting a slap on the wrists.

Along with the classic crisp and lovely design of the C900 monopusher, the stand out feature has to be the movement and monopusher or single pusher chronograph functionality, and this is all down to  CW’s second bespoke movement (Calibre JJ02), which was constructed and manufactures with the German” watchmaking wunderkind”, Johannes Jahnke. Johannes who has worked with the legendary watchmaker, Mr Jean Fillon to create a completely re-worked adaptation of the Unitas 6497 calibre for the C900. In adapting the 6497 into the JJ02 we also have a wonderful work of art of a movement when viewed through the case wide sapphire crystal exhibition caseback. A bit of detail regarding the JJ02 movement and a little history of Johannes Jahnke and Mr Jean Fillon can be see here at The Watch Review Site.

Through the full width exhibition case back  the mastery of the JJ02 is revealed in great detail, Jahnke’s JJO2 calibre is supremely elegant, clean and easy to understand. It is even possible to see how the sliding gear, clutch and brake allows the chronograph to be controlled by a single pusher, set within the crown. Lovely to view for the watch aficionado and connoisseur.

It is this monopusher or single pusher complication that makes the C900 a timepiece and not just a watch in my eyes, Christopher Ward is entering an area of the watch world that they have dabbled with in the Jump Hour with the C900, Can we say they have entered the world of Haute Horlogerie, but again at an affordable price point for the complication. We say affordable at £2,450.00 its not exactly that for most, but when you consider other monopushers in the market like the Bell and Ross WW1 Monopusher at £4,900.00, without an in-house movement (it does have a high end Le Joux Perret movement at its heart) and double the cost of the C900, to add we prefer the look of the Christopher Ward.

Another option is the Montblanc Nicolas Rieussec Monopusher at £6,800.00 nearly three times that of the C900, or there is the newly introduced Longines 180th Anniversary Monopusher Chronograph which is marketed at around £3,000.00 for the stainless steel model and over £7,000 for other models, but the stainless steel model is not limited in production like the C900 and again in our opinion the C900 is just simply nicer.

In the words of Christopher Ward “The C900 Single Pusher Chronograph is beyond question our most complicated watch to date and will make an entirely new level of sophistication accessible to more people than ever before because of the unique Christopher Ward value equation.”

“However, it’s the magnificence of the movement that really moves me. I was completely transfixed when I first saw what Johannes Jahnke had accomplished and I don’t mind admitting that I almost cried with a combination of joy and pride. We may produce even more complicated watches in the future but the C900 will always be a very special watch for me”.

So this limited edition monopusher from Christopher Ward has taken us aback a little with its solid workmanship, classic lines and design, beautiful working and looking JJ02 movement we agree with most of our peers that Christopher Ward have Definitely pulled out of the bag one of the most significant timepieces to be launched by the British watchmaker.

Have we mentioned that the movements are all put together personally by Johannes or his assistant and the C900 comes with a certificate of authentication signed by Johannes, again no mean feat at this price bracket. Manually constructed, hand made, hand finished pieces just don’t come at this price… well they do now.

Adding to this it is not only the JJ02 movement that is a masterpiece the actual crown and pusher itself was designed from scratch too, with considerable thought and skill has gone into creating this bespoke crown to overcome the challenge of incorporating the central axis as well as four ‘O’ rings, which allow the pusher to be depressed while still ensuring the watch remains waterproof. Now that’s some feat…

We have yapped on about the movement and initial looks of the C900 Single Pusher now to get down to the normal Hands on Review Stuff, firstly the wrist shots of this Christopher Ward Masterpiece, Well the stainless steel case is 43mm in diameter and nearly 16mm thick but even on my slight 6 3/4 inch (17cm) wrists it still felt comfortable and fit very well. See for yourselves.

The 15.7mm thickness of the watch, which is no surprise considering the movement it encases, is not overly big or protruding and fits comfortable under a shirt cuff and as I have been asked its probably slightly too large for the better half of the world at 43mm x 15.7mm, so sorry ladies. What I will say is that the thickness does not take away from the elegance and classic look of the timepiece with the slight brushed steel effect on the sides of the case, polished case and full width exhibition case back the C900 is elegantly put together to produce a lovely strikingly subtle yet eye catching watch that can be enjoyed by all even the slightly meagre wrist-ed in the world as myself.

The Watch itself is a very comfortable weight, apologies here as we didn’t get to weigh it as we are doing on our hands on reviews from now on, but if we get it back for a follow up we definitely will, IT is weighty enough for you to know you have a watch on and feel like you are getting something substantial for your money, but not too heavy for it to be a burden on the wrist, in reality I would have forgotten it was on my wrist had it not been for the fact that I couldn’t take my eyes off it and the comments I was getting form others who wondered what I was wearing. What I can say it was easy to get on and off the wrist as I did so on many occasions to show off the movement, as one does…

Christopher Ward has definitely travelled down the dress watch field here with a little sportiness thrown in for good measure, the C900 Harrison Single Pusher Chronograph is a beautifully refined yet masculine timepiece that can adorn anyone’s wrist and sit amongst some of the heavyweight punchers in the world of Haute Hologerie. Just one thing I would of really liked to see a date on the C900, maybe at 6 o’clock.

In our opinion, what you are getting with the Christopher Ward C900 Harrison Single Pusher is a really collectible timepiece and very affordable for what it actually is. If I could I would have one for myself in a blink of an eye, but right now it will probably sit on the wish list until the urge really overtakes and funds enable it… Well its really just the funds the urge and lust is there and its probably here to stay.

As in time honoured tradition here are the Technical details for the Christopher Ward C900 Harrison Single Pusher and following that a little gallery of photographs we have taken of the watch whilst in our care. 

Christopher Ward C900 Harrison Single Pusher – Technical Details

Worldwide limited edition of 250 pieces

Calibre: JJ02, hand-wound chronograph, highly modified from Unitas 6497, hand-wound mechanical chronograph by Johannes Jahnke with Jean Fillon

Vibrations: 18,000 vph

40 hour power reserve

Functions: Continuous seconds and 30 minute totaliser sub-dials operated through central crown function

Case: 316L stainless steel, Diameter: 43mm, Height: 15.9mm

Hand Finished, surgical grade, stainless steel case and crown

Museum-grade sapphire crystal with AR08 coating

Optic white one-piece 3-9 bi-compax dial

Screw-down transparent exhibition case back with full diameter anti-reflective crystal

Serial number engraved on both case and movement

Water resistance: 5 atm/50 metres

Strap: CITES approved, premium Louisana alligator deployment strap

And here is that Gallery of photos of the Christopher Ward C900 Harrison Single Pusher Chronograph, we promised you

Christopher Ward C8 Pilot MkII U-2 Vintage Edition – ‘Hands On’ Watch Review

Written by D Constant for The Watch Review Site.

Here at The Watch Review Site we would like to start by thanking the good people at Christopher Ward for supplying us with a review piece of their new C8 Pilot MkII, the U-2 Vintage Edition. Which is available on pre order and should be available to buy from the start of June 2012.

Now we have the thank you’s out of the way let’s get on with the real reason we are here, to see and review the Christopher Ward C8 Pilot MkII U-2 Vintage edition and put it through its paces on a Watch Review Site ‘Hands On’ Watch Review.

Our initial views are, that name it’s a bit long winded but it takes nothing away from the watch itself, The New Chr.Ward C8 Pilot MkII U-2 Vintage has moved on from the original C8 Pilot and also the C8 Pilot MkII, Gone are the Rivets on the Strap, the dial indicators and markers differ for that vintage look and it comes in a lovely 44mm PVD black case. Yes you heard right Black PVD (very nice) 

It’s a lovely addition to the Christopher Ward C8 Pilot Collection,which has been around for a while now,  it wears well and looks good in a variety of circumstances. The C8 Pilot MkII U-2 Vintage also performs as well as expected from any Swiss made and Swiss movement timepiece. All in All it’s a great little (well not little really) quality Pilot watch and for the money, well I haven’t seen or played with better.

So have Christopher Ward and their team pulled one out the bag here. Let’s get into the C8 Pilot MkII U-2 Vintage in Depth and see.

First off, when your C8 Pilot is delivered it comes very well presented in a black leather presentation box with light cream interior (which most would probably keep as it is a quality box to store watches that don’t require a winder), Along with this you get a quick start/functions guide, the guarantee and letter congratulating you on your purchase and a Christopher Ward microfibre cloth. All very nicely done. You feel like you have purchased a luxury timepiece from get go.

Once you get over the pleasure of unwrapping your new purchase you notice a fabulous looking, Striking Vintage style Pilot Watch, as Christopher Ward have so kindly pointed out on their website, the C8 Pilot is a traditional Pilot Watch which is based upon the 1940’s classic  IWC B-Uhren watch. If you ask me with its Black PVD case there an argument to say it’s akin to the Bell & Ross BR Vintage 123 Carbon Series in looks. Not a bad thing hey.

The C8 Mk2, is very well balanced in style and colour choice throughout, hopefully this comes across in our attempts to do the Christopher Pilot MkII u-2 Vintage justice in our photographs.

What do you expect from a classic Pilot Watch?

Well, whatever it is the Chr.Ward C8 MkII U-2 Vintage has it, from its 44mm Black PVD case to its CW branding on the distressed orange/brown leather strap, its the complete package.

The vintage retro feel begins with your first glance at the Watch, the hands and markers, to slightly contrast its black dial are the in military beige as the use of “Old Radium Super Luminova” is apparent  which gives more than sufficient Lumin for the discerning Pilot along with the vintage feel such a timepiece deserves.

And it just goes on with the new distressed leather brown/orange strap (less rivets – I feel it’s better without the rivets and allows the watch to be worn for different occasions easily) is a great touch by Christopher Ward.  Now on to the piste-de-resistance in my opinion of the C8 Pilot MkII U-2 Vintage, it’s Black PVD Case making this Pilot a competitor in the looks department for most of the (shall we say) more expensive and well known Pilot Watches out there.

Even its large onion style crown has the CW touch on the head. Whilst we are talking large the case is 44mm and I have very small wrists, when I first took the C8 out of the packaging to place on my wrist (after struggling to reduce the strap size to suit me, the struggling bit is due to me being a little impatient and the strap being new and stubborn, but in a good way) I thought this is going to be way too big for me. But no once on it felt very comfortable, the crown did not infringe or extrude at all and the watch sat nicely on my wrist this may be down to the thickness of the watch but whatever it is it fits well even for the limp wristed like me.

Over and above the obvious first impressions you also notice the time and effort and preciseness that Christopher Ward have put into the C8 Pilot Mk2 U-2 Vintage (I really can’t think of a way of shortening this name without referring to previous CW Pilots, Sorry);

Like the date window on the dial, Christopher Ward use a black date disc, others would have used white, and it is placed so it doesn’t infringe on the 3 o’clock marker, another great touch.

The Buckle, it’s the same as previous C8’s but also coated in Black PVD, with the CW logo on it, the placement of the CW logo on the strap end, further the CW logo on the crown, yes it sounds like there are lots of logos but they are done so meticulously well they are not in your face and are just really good touches to an already great watch.

The weight of the watch, it feels like you have made a substantial purchase, it’s weighted very well and is solid and wholesome.

But the thing I like best is the unique case back with a small round window allowing you to see the Swiss Selitta SW200  movement, but that’s not all the case back also has  it also has a stamped image of what can be described an airplane wing, you tell me.

Its these little touches that make the Christopher Ward, not just a good Pilot Watch but a Great one, Now add all the above to the fact that it is powered by a true Swiss movement in the Selitta Sw200-1 and you have the complete package and all for well under £500.00.

Yes, Gasp, Shock Horror, Amazement, This Christopher Ward C8 Pilot Watch – U-2 Vintage in Black PVD which can compete with the four figure equivalents very easily comes in at less than monkey.

To Sum up it has been a pleasure sporting the Christopher Ward C8 Pilot MkII U-2 Vintage Watch for the last few weeks, this is a clean, simple, well built automatic Vintage Pilot Watch that can hold its own in any company.

The Quality and outstanding build quality, along with the clear effort that would have been put in to achieve such a great timepiece far exceeds its price tag.

Taking everything into consideration its British design, Swiss movement, Swiss made I would go as far to say that if you where to only buy one Traditional vintage Pilot Watch to add to your collection the Christopher Ward C8 Pilot MkII U-2 Vintage is the one for you.

For anyone that is interested we have a little photo gallery of the Christopher Ward C8 Pilot MkII U-2 Vintage after the technical details below.

Christopher Ward C8 Pilot Mk2 U-2 Vintage – Technical Details

Case : Steel coated with Black PVD

Diameter: 44mm, Height: 9.7mm,Weight: 114g

Soft iron anti-magnetic inner case

Movement: Selitta SW200-1 Automatic, with manual winding option

26 Jewels

Incabloc anti shock system

Power reserve: 38 hours

Frequency: 28800 per hour

Dial: Black Soft iron anti-magnetic

Anti-reflective sapphire crystal

Hands and Markers Old Radium Super-luminova

Case Back: Screw down back plate , Balance wheel viewing window

Strap:  Tunnel stitch and calf’s leather strap

Buckle: Black PVD Butterfly opening deployment system

Kennett Savro Men’s Watch – Hands on Review

We are looking to launch our British Watches Section on The Watch Review Site not only will we be including all our news and reviews previously undertaken on British watchmakers like Christopher Ward, Schofield Watch Company, Bremont Watch company, Speake-Marin and Robert Loomes to name a few. We are kicking off with our first ‘Hands on Review’ of one of the Tom Kennett Men’s Watch range and where better than with the Savro…. We will also be undertaking Video Reviews and this will be the first but due to technical issues we will have to bring this to you later (the video that is)…. Sorry — So look out for the new section of our site coming soon…

For those of you who have not heard of our Tom Kennett, well young Tom is a Scottish designer and entrepreneur who first launch the Kennett brand as a Cuff Links and Accessories designer in 2007 with a view to introducing watches to the brand later, this venture was successful and Tom was voted Young Designer of the Year in his category and has subsequently had nominations in various awards ever since. Tom launched his Watch brand off the back of this success in 2009 and the Kennett brand is now focussed on the design and manufacture of luxury watches and cufflinks, and can be found in over 10 countries worldwide, We have seen Tom improve the Kennett brand over the years and are glad for the opportunity to take a look at his watches a little closer.

We have had all three Kennett Men’s Watches in for hands on Review thanks to Tom Kennett himself and a fine selection it is, for starters all the current range have a Miyota Quartz movement, the Savro sports a Miyota chronograph movement, these movements have a growing reputation in the industry and are on par with their Swiss counterparts at Ronda and the like. We also have it on good authority that a new Kennett Swiss Made Range is due for launch soon, will be interested in seeing what this young Scottish designer has in store for us here.

So back to the Savro Chronograph well the movement provides for a chrono seconds hand activated and stopped by the top pusher, an hour sub dial at 3 o’clock (not linked to the chronograph function, just states the current hour), a small seconds at 6 o’clock and chronograph minutes indicator at 9 o’clock, along with the standard two handed time display. Oh and a date in between the 4 and 5 o’clock markers.

The model we have had the pleasure in reviewing is the Black and Silver Savro Men’s Watch, I keep on saying Men’s watch as Kennett has just recently launched a ladies range and the Savro is his first watch in this sector. (Tom has promised to send one for review soon) The Men’s Savro is part of what Kennett call their Black Label Range, which is to define elegance, classic looks and a watch for the more formal occasion, whether it be work or play.

The colour combination works very well with the Black face and Silver Tachymeter internal fixed bezel and silver Roman numerals and indicators, as for lume there is none really, but hey it’s not a pilots watch or a divers is it, It is marketed as a dress watch and as such is it really required, this dial is offset fabulously by the shiny polished stainless steel case and domed glass/crystal (both making taking photographs of this timepiece very difficult) which all tolled make the Kennett Savro much more desirable than its price tag.

Furthermore it is adorned with a black Italian leather strap and crisp polished stainless steel buckle, the case back is also polished stainless steel and has the Kennet logo and name etched into the centre with the usual elements engraved around the edge, these being the fact that it is stainless steel case, base and bezel and the fact that it is Water resistant to 5 ATM or 50 meters.

So enough about the functionality and looks and onto the feel of the watch, well it is 43.5 mm in diameter and fits extremely well on my 6 ¾ inch wrists, the Savro is comfortable to wear and we have put it through its paces. As we said it is comfortable, clean, crisp and well proportioned, you easily forget it is on your wrist when wearing it for the day, which we class as a good thing and it does get noticed when peeking out from under your shirt cuff (should have got Tom Kennett to send us some of those Cuff links he makes too).

One thing we loved about the Savro was the Blue Chronograph second hand, it just sets off the entire watch and looks fab. Little things I hear you all say…
The Savro is also available in the following variations fit for all tastes, you have Stainless Steel case with white face and internal bezel with either black or tan leather strap and Rose Gold Tone plated case with white face and internal bezel with either black or dark brown leather strap. On the white dial that lovely blue seconds hand is even more distinctive.

So that is five different variations, our favourite is probably the Rose Gold on dark brown strap even though I have never been a Rose Gold man, it just really suits the watches style and look.

As with The Watch Review Site’s usual tradition on Hands on Reviews we have the watches technical details below and a little photo gallery below that. Oh and the Savro is available online form various retailers included direct from Kennet at http://www.kennettonline.com/  and we probably forgot to mention that all Kennet Watches come with a Kennett 2 year guarantee.

You can also follow the brand on twitter https://twitter.com/kennettbrand and Facebook at http://www.facebook.com/kennettglobal

Kennet Men’s Savro Chronograph Watch – Technical Details

 Case: Polished Stainless Steel
Case Width: 43mm
Thickness: 13.5mm
Weight: 75g
Movement: Miyota Quartz Chronograph
Dial: Black with Silver internal bezel, also available White with White internal bezel
Strap: Leather strap, black, tan or dark brown
Water Resistance: 5ATM or 50 meters
Look: Classic/Formal

Christopher Ward C11 MSL Black Manta MK I – Hands On Watch Review

Written by D Constant for The Watch Review Site

We have the pleasure of undertaking a ‘hands on’ watch review of the New Christopher Ward C11 MSL Black Manta Mk1, which is currently available for pre-order via the Christopher Ward London Limited website. As you probably already know Christopher Ward only sell their watches online via their own website, this marketing method allows CW to reduce marketing costs and hence the market price of their British designed, Swiss made and manufactured timepieces.

The C11 MSL Black Manta MK1 is the latest in the range of aviation watches on offer by Christopher Ward, it is an addition to the already established Christopher Ward C11 MSL Range. The C11 MSL Black Manta comes with an all new PVD black case, this being the primary difference between the previous released C11 MSL which sported a polished steel case, It is available as a Chronograph Watch or Automatic Watch. The later being the one we have to play with and on that note thank you to the guys and gals at Christopher Ward for providing this C11 MSL Black Manta Mk1 Automatic watch for us at the Watch Review Site to put it through its paces in one of our ‘Hands On’ watch reviews.

So on to the task at hand, The C11 MSL Black Manta MK1 Automatic, Another one of CW’s long names, yes, yes, I know we can call it the C11 but that doesn’t differentiate it from the other C11’s does it so it’s the full name again.

We are not going to go into detail about how it is delivered as we have covered this on previous Reviews as in the C8 Pilot Hands on review, let’s just say you will not be disappointed when you receive your package.

First impressions are that this is an aviation watch that is based on a modern airplanes altimeter so heading away from the traditional pilot watches to a more contemporary version of a pilot watch akin to the Bell and Ross’s of this world. On the C11 MSL Black Manta we have a round dial placed in an altimeter style PVD black stainless steel case, CW have even placed a screw in each corner to depict the altimeter look even further.

Christopher Ward state the following with regards to the design and inspiration behind the Black Manta “Based on the cockpits of fast jets the C11 MSL is indeed an interesting and fast paced addition to the range, whilst less workmanlike than some if its peers, the C11 MSL retains its functionality.”

The C11 MSL black Manta has a very clean and crisp look to it, and makes a bold but understated statement when on the wrist, this 42mm case and 35.2mm dial are strikingly simple and attractive, with very large white numerals at 12, 3, 6 and 9 and large wide black and white striking hands, the entire piece comes together and has a sense of purpose.

The lack of minute indicators adds to the watches simplicity, but does not impair the reading of the time. Along with the inconspicuous second hand (a good thing in my book) and very well placed white numbers on black date indictor at 4 o’clock, the C11 MSL Black Manta MK1 Automatic ticks all the boxes in the looks department.

It’s a large watch but slim and wears well and fits even on small wrists, It’s light yet weighty enough to feel very comfortable on the wrist, It’s simple yet bold and striking and it can be worn daily with a suit or with casual wear, it’s adaptive and whatever the occasion brings attention to your wrist because of all the above. A wrist watch for all occasions.

As we are talking about looks and styling we should really mention that the Black Manta has a flat anti reflective coated sapphire crystal glass with the anti reflective coating being present on the exterior of the glass and not the interior as in the norm with Christopher Ward watches, this was a step taken as the glare reduction is substantially increased with the coating on the outside of the sapphire crystal as opposed to the inside. You do notice a blue tint to the sapphire crystal , which is down to the anti reflective coating but that doesn’t distract from the look of the watch at all and is only visible when the watch is in certain positions.

Along with the effective use of the coating, museum grade sapphire crystal has been used which further increases clarity and night time visibility of the C11 MSL Black Manta Mk1 Automatic.

With regards to night time visibility the numerals, markers and hands are all coated with SuperLuminova and its Lumen at night provides a very visible timepiece.    

As you may well already know I have quite petite wrists and need to wear most watches (scrap that, all watches) on the smallest possible fitting and even then may need to add a hole or two myself, not always very successfully, (that’s where custom straps come in) so a 42mm case is always a challenge but this CW C11 MSL fits well and is very comfortable to wear even for me, this could well be down to the slimness of the watch at 10.7mm. See for yourselves in these wrist shots.

It’s a comfort that the C11 MSL Black Manta Mk1 Automatic fits well as it would be a shame to replace the strap with a customised version as so much attention to detail has been put into this by Christopher Ward from the black buckle, so delicately emblazoned with Christopher

It’s a comfort that the C11 MSL Black Manta Mk1 Automatic fits well as it would be a shame to replace the strap with a customised version as so much attention to detail has been put into this by Christopher Ward from the black buckle, so delicately emblazoned with Christopher  Ward London and two decorative screws to match the case.  The strap itself feels thick and sturdy and has quality stitching, with the small CW logo at the end.  Oh and it has tool free simple to use quick release lugs.

Again these little touches and attention to detail show how Christopher Ward value your custom and reflect the recent step up in build quality we have seen in the Christopher Ward ranges, we saw it with the C8 Pilot and the C11 MSL Black Manta is also built to exacting standards with quality workmanship.

Moving onto the Case back of the Black Manta, again we see Christopher Wards emphasis upon design and quality,  in normal circumstance you have your serial numbers and water resistance figures, not here on the C11 MSL Black Manta MK1 you have an engraved Latin inscription and a jet, the inscription translated stands for ‘Reach for the Stars’ quite apt for an aviator watch. Oh it also says Swiss made and has a serial number to the lower end but as such are not very noticeable so don’t detract from the main engravings.

We should really begin to mention to movement, again as with other Chris Ward pieces they have opted for the true Swiss mechanism in a Selitta SW200-1 or ETA 2824-2, both mechanisms do the same job and are of similar quality, the reason for two movement selections here is that ETA movements have becoming more and more limited in the market place due to steps by the owner Swatch in restricting supply, but Selitta movements are just as good and are becoming more and more popular.

So once again Christopher Ward have pulled one out of the bag with the C11 MSL Black Manta Mk1, it comes with a unique and attractive case design, and bold simplistic dial and on the wrist, it’s absolutely gorgeous.

Casing point here we had both the C8 Pilot MkII U-2 Vintage and C11 MSL Black Manta MK1 Automatic in for review at the same time, both turned out to be great watches but when I first opened the boxes I was drawn to the C8 Pilot it retro look, and undeniable Pilot Watch look but with time it was the C11 MSL that spent the most time on my wrist. Now that’s saying something as the C8 is a fabulous watch and one I would recommend to anyone who wants a retro vintage Pilot, but the C11 MSL Black Manta is really just that little different and little diverse and that i like…

One very important thing we have not mentioned in this review yet and it’s the price of the Christopher Ward C11 MSL Black Manta Mk1 Automatic at just £450.00 incl. VAT (UK Price) it just makes it even better, we can’t see many unique aviators with such a build quality and customer service backup in the market to compete at this price bracket.

The C11 Black Manta comes with the option of black or brown leather straps and is also available as a Chronograph at £399.00 incl. VAT (UK Price with) a Ronda 5030.D movement.

We have spoken to the team at Christopher Ward and we can confirm that we will be seeing further variation on the C11 MSL with a HRDC (Historic Racing Drivers Club) edition and a Mercedes Benz Club edition. The HRDC version looks lovely and we will be getting hold of it for review when its available fingers crossed.

As with all our hands on watch reviews here at The Watch Review Site we have provided a little gallery of photos of the Christopher Ward C11 MSL Black Manta MK1 Automatic after the Technical Details.

Technical Details – Christopher Ward C11 MSL Black Manta Mk1 Automatic

Case: 316l Surgical Grade Steel coated with Black PVD

Diameter: 42mm, Height: 10.7mm, Weight: 108g

Movement: ETA 2824-2/Selitta SW200-1 Automatic, with manual winding option

25/26 Jewels

Incabloc anti shock system

Power reserve: 38 hours

Frequency: 28800 per hour

Water Resistance: 100m/10atm

Dial: Black

Black date calendar

Anti-reflective museum grade sapphire crystal

Hands and Markers Luminous hands and Indexes Superluminova

Case Back: Hand Polished Screw-in back plate

Strap: 22mm Italian leather strap

Buckle: Black PVD

Photo Gallery – Christopher Ward C11 MSL Black Manta Mk1 Automatic

Hands on with the Xetum Stinson Automatic

Written by Richard Zolla for The Watch Review Site

Well it’s been a long time sitting on my desktop, so firstly apologise to Rick and Xetum for not getting this out there sooner, this had a fair bit to do with being unable to undertake any computer work for a couple of months…. But that is now history and The Watch Review Sites year begins in earnest today.

Enough of the chit chat lets get on with our first Hands On Review of 2013, firstly let us thank Xetum for supplying the Stinson in all its glory to Our new contributor and writer Rick Zolla, who is based in sunny California (I think) and thank you Rick for undertaking your first hands on review for our little site on the other side of the pond. Now I have got that all out the way i Hand you over to Rick and his review of the Xetum Stinson timepiece… Enjoy the read we sure did.

The first thing you may notice about the Xetum Stinson is the apparent size. My first impression was “wow this is a large watch”. Actually the diameter of the watch is only 41 mm and as it is a lugless, ‘puck’ style case, it should be an excellent choice for the person with a small to typically sized wrist. In fact I’m sure it would look excellent on a larger wrist in a formal/dress setting.

The apparent size is the effect of the 41 mm round case design, and the fact that the case has no bezel. This affords  the sapphire crystal to be large at 35 mm, to allow maximum readability of the equally large dial. The dial itself is mat black, and that combined with optic white dial lettering, gives the effect of a virtually invisible crystal.

The hour and minute hands are large, well lumed, and provide superior visibility. The seconds hand is also painted white, and provides easy daytime visibility, but is not lumed for nighttime viewing. Also provided at the three o’clock position is a small date window with a white-on-black date wheel. I find this especially pleasing as it is small enough  not to detract from the overall balanced look of the dial. The Xetum logo is positioned at nine o’clock.

On the wrist, the presence of the watch is enhanced by the large dial, however the moderately sized case allows for a comfortable fit and pleasing proportions.  The height of the case from case back to crystal measures 11 mm while the case sides are brushed, with two raised, polished accent rings that provide visual balance to the hex-shaped screw-down crown.

The case back is also brushed and contains a 24 mm by 20 mm mineral crystal window to allow a view of the ETA 2824-2 automatic movement. A quality trusted Swiss Made movement for this American designed timepiece. Incorporated into the case/case back are the attachment points for the strap.

The strap itself is black leather with white stitching and tapers from 20 mm at the watch to 17.5 mm at the clasp. The length of the strap is 73 mm /111 mm and it has ten adjustment holes. The number five adjustment was perfect for my seven inch wrist, and allowed the Xetum signed butterfly clasp to sit comfortably in the center of my wrist. Those with smaller wrists will find no difficulty with the Xetum Stinson strap.

In summary, in the Stinson model, Xetum has produced a stylish timepiece in a unique package. and, has done so in a size comfortable to a vast number of watch wearers. The Stinson provides a lot of wrist presence in a moderately sized timepiece. Perhaps it’s time you try a Xetum Stinson. You may be surprised.

So it looks like this slowly becoming American stalwart of a watchmaker in Xetum has left a lasting impression on our American correspondent Rick. Ooh as with all our Hands on reviews don’t forget our little gallery below the Technical Details.

Xetums own overview – The Stinson men’s Swiss automatic watch is all about the basics. A sweep second hand powered by an ETA Swiss automatic watch movement glides effortlessly around the minimalist dial. For those who appreciate uncluttered functionality and design, the Stinson represents timekeeping at its most fundamental level.

Technical Details – Xetum Stinson

One last thing to say is Thank you once again to Rick Zolla for the Review and if you want to follow Rick you can on Facebook at http://www.facebook.com/rick.zolla

Christopher Ward C900 Mono pusher Chrono

Sneak Peek at our next ‘Hands on Review’

By D Constant

We are ever so excited here at The Watch Review Site, so we just had to let you see a few shots of the upcoming Christopher Ward C900 Mono pusher which we have the pleasure of having for a Hands on Review courtesy of CWL. Yes we know the watch is on pre-order but they so kindly let us play with their one and only sample timepiece.

The key here is that this represents a huge leap forward in terms of complication and uniqueness for Christopher Ward as a brand. The C900 has the pleasure of only CW’s second bespoke movement (Calibre JJO2), which was constructed and manufactures with the German” watchmaking wunderkind”, the 28 year old Johannes Jahnke (the first was calibre JJO1,  which was in the much-praised jumping hour watch). Johannes who has worked with the  legendary watchmaker, 84 year old Mr Jean Fillon to create a completely re-worked adaptation of the Unitas 6497 calibre for the C900 mono pusher or single pusher.

The net result of JJ’s revolutionary approach means that the owner receives a unique view through the case-wide exhibition case-back of how a chronograph actually works. This being a mono pusher all the functions are worked through a single central pusher in the crown and this is a very significant complication for the brand to exhibit on the C900 watch.

A Quote form Christopher Ward London, highlights its vision “For a watch of this vision, uniqueness and complexity it would be realistic to expect a retail price of £7k and upwards. That CW is able to deliver this to our customers at £2450 is a source of great pride and further underlines our determination to bring the truly top class timepieces within the reach of many more people.

The JJ02 movement of the C900 is encased in a 43mm Stainless Steel case with a medium thickness suitable for most wrists.  The face is white with black Roman numerals at 12 and 6. The thin, needle like dials allow precise pointing and add to the look of the Christopher Ward C900. With two sub dials are devoted to a 30 minute measure for the chronograph and running seconds. 

Now that’s enough and you have to wait a few days for our full review and some proper photos. If you want to see a little more about the Christopher Ward C900 and cant wait for our Full Hands On Review why not visit the Christopher Ward London Website for Pre Order Information on the C900 Mono Pusher Chronograph.

or for more CWL hands on reviews visit our brand page and scroll down to the posts – /category/christopher-ward/

The Full Hands on Review of the C900 Single Pusher Chronograph is here … Please read it if you like what you see above.

Christopher Ward C11 MSL Automatic Vintage – ‘Hands on’

Written By D.Constant

We got a pleasant surprise one morning when whilst sitting at our desk working away on our computer a knock on the door, we both look at each other thinking I’m not expecting anything, you… yes on that particular day there were two of us in the office. So off I go to the door and to my surprise it was a Christopher Ward Box, when you see one of those without even opening it your eyes have to light up…

Post man said another watch? which one is this then? to my surprise again as I’ve never actually managed to get a word out of him before.

My reply was Hope so… And Not a clue whats in the box but I’m sure it will be good as its from Christopher Ward.

He said “yeah they are some nice watches I’ve got the C5 Malvern” showing me his wrist with a smile on his face

Lovely…

I’m sure you don’t want to know the extent of the conversation, but lets just say the postie is a watch man and I have found a friend for life I think oh and not to mention my post will never go missing again…

On Opening the package, we were presented with the usual top quality packaging and watch box, which wouldn’t go amiss from anyone’s bedside table or dresser and what do we see but the new C11 MSL Automatic Vintage, CW knew our feelings on the C11 MSL Black Manta, which we reviewed a few months ago, so I assume they thought we would appreciate seeing the newest addition to the family and they were right any delivery from Christopher Ward is always received with open arms at The Watch Review Site, shame we have to send them back after a few weeks.

So on to the C11 MSL Automatic – Vintage Edition by Christopher Ward, at first glance its basically the C11 MSL Automatic Black Manta which we reviewed in depth here. The version we received was the one with the brown strap, The biggest difference between the two watches is the lumin coating on the hands, indices and markers.

Christopher Ward state the following with regards to the design and inspiration behind the C11 MSL Vintage “The vintage edition of the much-heralded C11 adds a new dimension to this modern classic CW design and was inspired by the courage and determination of the American test pilots of the post-war era who paved the way for the 1960s space programme.”

This new old radium superluminova coating forms a very light brown, vintage appearance and this is has been applied to the indices, markers, numerals and the tips of the hands, This off sets very well against the black PVD case and black dial. I must say that I personally prefer the Black Manta with its high white lumin, but that is a totally individual opinion. The new Lumin gives a new dimension to the watch and gives the C11 MSL Vintage a distinctive look.

I have to add here looking at the Chr.Ward website the colour of the lumin does not come out in the photo’s its a deeper cream edging brown. hopefully its clearer in our photographs, they may not be as professional and as good as the ones from CW’s Website but hopefully they do a job.

Whilst we are talking about the look of the C11 MSL Vintage, this new addition to the C11 aviation range has the new Christopher Ward London Watches Logo in letters i.e. CHR.WARD LONDON with no Logo. I actually prefer the new style which I know is a no no for a lot of Christopher Ward fans, but given time I’m sure they will get used to this new modern look of the logo.

Christopher Ward have added a new watch to an already great range and have given the customer something else to think about when purchasing a C11 MSL, the case is still extremely sharp and in my opinion quiet unique in its octagonal-ish shape and round dial. we still see the Automatic (which is the only type Christopher Ward have manufactured in the Vintage) with a Sellita SW200-1 calibre at its heart. As with all Christopher Ward Watches the movement is Swiss made.

Another difference, albeit very small is the hand finished case and case back on the C11 MSL Vintage Automatic Watch with unique engraved serial number, I am sure the others didn’t have this, but if they did sorry… the hand finished bit that is.

As we stated before there is no chronograph in the vintage C11 but it does come with two strap options, both triple thickness Italian leather 22mm straps, one in brown and the other in black. Also the straps have a quick release clip too, great for changing straps easily and without the need of any tools.

As this is a hands on review we have to have the obligatory wrist shot or two, and can only but reiterate that the fit of the C11 MSL is very comfortable and its 42mm case does not look overly large or out of place on my slight wrists, The strap is comfortable and the watch has a distinctly nice weight and feel to it.

Technical Details – Christopher Ward C11 MSL Vintage Automatic

Case: 316l Surgical Grade Steel coated with Black PVD, hand finished

Diameter: 42mm, Height: 10.7mm, Weight: 108g

Movement: Sellita SW200-1 Automatic, with manual winding option

26 Jewels

Power reserve: 38 hours

Frequency: 28800 per hour

Water Resistance: 100m/10atm

Dial: Black

Black date calendar

Anti-reflective museum grade sapphire crystal

Hands and Markers Old Rodium Luminous hands and Indexes Superluminova

Case Back: Hand Polished Screw-in back plate

Strap: 22mm Italian leather strap in black or brown

Buckle: Black PVD

 

Photo Gallery – Christopher Ward C11 MSL Vintage Automatic

Why not check out some other ‘Hands on Reviews’ of Christopher Ward Watches on The Watch Review Site, like the C11 MSL Mk1 Black Manta Automatic or the C700 Grande Rapide Chrono.

Christopher Ward C700 Grande Rapide Automatic Chronograph – ‘Hands On Watch Review’

Written by D Constant for The Watch Review Site

So we have had another delivery from our friends over at Christopher Ward London and this time it’s the C700 Grande Rapide Automatic Chronograph, first impressions do not disappoint in any way.

Before we tell you our thoughts, let’s see what the good people at CW say about their own watch

“We were driven by a desire for excellence in creating the C700 and we hope you are equally driven by a desire to own one of these wonderful watches.”

The Christopher Ward C700 Grande Rapide is, “quite simply, a magnificent example of the automatic chronograph genre”.

The Christopher Ward C700 Grande Rapide Chronograph Watch is one of the British watchmaker’s most ambitious timepieces yet, when talking styling. It is a more modern take on their traditional styles, this timepiece in terms of imagery is a step in a different direction to what Christopher Ward has previously designed.

With that in mind, I would like to point out we are seeing more and more of this innovation in design from Christopher Ward as with the C11 MSL Black Manta, which The Watch Review Site reviewed here. These new designs coming out from the CW studio are slightly away from the norm, where the C700 Grande Rapide stands out is in the materials used which we have never before seen on a Christopher Ward Watch, we see it highlighted by Chris Ward himself;

“Nothing about the watch is a compromise; every aspect of the design has been driven by the desire to create the ultimate motorsport watch.  The C700 has been created for people who prefer to make the most of every second and observe their rivals in their rear-view mirror.” 

So we have given you a little introduction to the C700, let us quickly say thank you to Christopher Ward London for sending us the C700 for this Hands On Review and we look forward to playing with many more CW London Watches in the future please…

Now to the reason we are here, and our thoughts after a couple of months with the Christopher Ward C700 Grande Rapide Automatic Chronograph. As with all CW watches, it was received in the usual exemplary packaging and watch box, with an extensive and easy to read user guide, and numbered proof of purchase, along with the CW cleaning cloth. You also get a lovely personal thank you for buying letter with some tips on watch care. Even with this being one of the more expensive watches in the CW range (you will see why later), the presentation and delivery are still above what you would expect from a watch at this price level.

One thing that is apparent, the Christopher Ward C700 Grande Rapide is totally inspired by Motorsport and Christopher Ward’s personal fascination with the sport, from the black carbon fibre dial to the interesting silicone rubber strap with a carbon weave effect, tyre impersonation at its best. That aside you cannot forget that even though this timepiece is British in design and styling, its internal workings and movement are all Swiss made and this is the reason why it is one of the higher priced items in the Chris Ward catalogue. Not just that it’s Swiss made as this is expected and a must for a CW watch and is part of the company ethos but the fact that the C700 is powered by the ETA Valjoux 7750 automatic movement.

A movement synonymous with some of the more expensive luxury brands out there, we have seen the ETA 7750 or variation of in the likes of the IWC Portuguese, Panerai Pam48, Omega Seamaster and a few Breitlings to name a few, so the C700 is in very good company. The C700 does use the elabore version of the ETA 7750 which many of the above have adapted or use chronomat or COSC version of the 7750 before using it in their watches, but the basic movement is an ETA7750.

The ETA Valjoux 7750 has a distinctive feel when worn on the wrist, a feeling you get very accustomed to and when you wear a watch which is not an automatic 7750 you feel a little lost. You can feel the mechanism working when you move your arm at the beginning and its a feeling that once you get used to it,  is amazingly reassuring. For those that may be concerned by my comments don’t be its very common amongst watches with the ETA 7750 movement driving them and for me is a sign of quality and provides a sense of being. As for the movement it was first introduced in 1974 by Valjoux (who were subsequently taken over by ETA) and has been a staple for automatic chronographs since, it runs a t 28,800 bph and has 25 jewels, and provides a 3 counter chronograph.

So is the watch itself of sufficient standing to adorn such a movement? Let’s see…

When you first see the C700 Grande Rapide it strikes you as a great looking watch, its shiny Stainless Steel polished 42 mm case and carbon fibre dial set behind a sapphire crystal anti-reflective glass, look fabulous together, then add the black silicone rubber strap and you really do have a good looking timepiece. HULK agrees…

The dial is carbon fibre with a weave style effect, to off set this the dial is layered with satin finished metal and carbon to the 3 counters at 6, 9 and 12 o’clock with contrasting  polished hands and hour markers which bring the dial to life. The hands and hour markers do have lumen applied, but it is limited and very small so no real low light illumination on the C700 Grande Rapide Automatic Chronograph. I’m not the only one that thinks this as per some comments received on the independent CW Forum

Malfozzy –  “I have just received the c700 with metal bracelet today. It’s my third CW watch and can’t fault it except for a minor detail. The luminous hands, hour markers are useless. If they we painted black and then camouflaged it wouldn’t be any worse than it is now. Lovely watch though.”

We also have a day date function at 3 o’clock which is white with black typeface, which makes it visible and stand out from the dial, I may have wanted to see it with a white on black day date but that’s probably being picky. To further enhance its motor racing heritage you have a Tachymetric scale to allow the calculation of speed of a race car over a mile.

The counters on the Christopher Ward C700 are a 30 minute and 12 hour counter as well as a 60 second chronograph, the counters are obviously further inspired by motor sports  with their circular Guilloche pattern at its heart and have a rev counter feel. The seconds are counted down via the 9 o’clock counter and its a smooth rotational movement courtesy of the ETA 7750. The chronograph function consists of hours at 6 o’clock, minutes at 12 o’clock and a stop second controlled by the upper and lower push in crowns.

As we are talking crowns the main crown is a screw in crown at 3 o’clock, and has the CW logo embedded on it, and it works as expected, what I will point out is that I found the push buttons for the chronograph / stopwatch use are a little clunky for want of a better description, they are a little loose and when you push them they seem to click and judder a little. I have been assured that with use this should subside by members of the Christopher Ward forum… we will see? ooh I just thought we would get in the Hero and Villains thing with some of the photographs, hope you like them.

The case is 42mm in diameter and made of surgical grade stainless steel (if the fact that its surgical grade matters) and is highly polished which offsets the watch very well, onto the back of the case and we have an exhibition case-back with sapphire crystal which gives you a lovely view of that ETA 7750 movement, which is engraved with Christopher Ward, even if you don’t take it off to show others, you can rest assured that every time you remove the C700 you will glimpse at the mechanism and have wry little smile.

On the stainless steel surround of the case back you have the serial number engraved along with the words Swiss Made in case you were in any doubt it was actually Swiss made. As with previous reviews please note my wrist is a meagre 6 3/4 inches, I say meagre as everyone comments on how small it is but even though it is this 42mm watch still fits well and look good, even if i do say so myself, the case doesn’t look or feel 42mm.

Kip of Christopher ward Forum says “At 42mm this is a perfect and extremely comfortable size. The brightly polished bezel allows it to look a bit smaller and gives the watch a bit of a dressy look.”

We have yet to mention the strap and buckle on the C700, the version we have with us we had the privileged of the Black silicone rubber strap and it is an exquisite strap, it fits well and wears wonderfully with the contrasting case, it also highlights the watches motor racing concept and theme wonderfully, It was suggested that the watch is better on the stainless steel bracelet so as we were taken aback by the C700 Grande Rapide and its movement we decided to keep the watch and purchased it from Christopher Ward but also took advantage and ordered a stainless steel bracelet, which has been received. We have yet to install it on the C700 as we are enjoying it the way it is, rubber and all. The buckle is a standard CW buckle and is a mixture of satin and polished stainless steel, it is solid and strong so no fear of snapping it as I have on other watches previously…. Naughty Dino

For clarity the Christopher Ward C700 Grande Rapide comes in three models, the only differnce between them is the strap or bracelet combination. These models are

C700SKSI – Silicone Rubber Strap which mirrors the dial with its polished chequered flag design

C700SKS – Steel Bracelet

C700SKK – Black Leather

Another comment from a Forum member highlighting the thoughts on strap choice here

RockyRacoon – “I’ve had my C700 since February and I have worn it it pretty much daily. I think it looks great on stainless steel and leather and feels nice and weighty on the wrist – not too bold on my small wrists. If anything, the stainless steel strap suits a smaller wrist better, because the leather doesn’t flex very much at the point where it meets the lugs. But for me it is acceptable. Yes, the pushers are a little bit clunky, although I’ve no idea if that is normal for an automatic chrono. To be honest, I’m fine with it because it actually feels like I’m interacting with a piece of machinery”

One thing that older Christopher Ward watches fell down on was build quality, well there is no such downside to the C700 as with recent Chris Ward releases the build quality of the watches has been stepped up and is exceptional, the watch feels weighty and sturdy, with an air of quality to its manufacture and composition.

The penultimate paragraph must of given it away a little. Yes, We loved the CW C700 Grande Rapide so much I bought it for myself and an additional bracelet too for added measure and one of the factors that led to this purchase was the price, a similar timepiece with similar movement could cost you anything up to £3,000.00 from some of the other mainstream luxury watchmakers, but even though this is one of the Christopher Ward’s highest priced models the C700’s are still only priced at £799.00 for the strap versions and £860.00 for the Steel bracelet version, for our US counterparts that’s $1,165.00 and $1,235.00 and are available directly from Christopher Ward via their website Christopher Ward London Limited

For good measure here is a few snippets from a little review by Kip at the CWForum about the C700

“If you like the carbon fiber dial as, I do, there is a WOW factor when you open the box. When not viewed in a macro setting, the pattern of the dial tends to be subtle in that it shows just the right amount of pattern in the background. The silver accents on the seconds sub-dial at 9 o’clock give this a bit of an off balance look but it also tends to offset the white day/date wheel at 3. ”

“This watch really screams bracelet. I have one on order and will be trying that as soon as they arrive. I believe that this will really make this watch jump up and shout “look at me”! This might even look good in a mesh bracelet.”

At this point we would like to thank the members of the Christopher Ward Forum – http://www.christopherwardforum.com/ for their input into this review and also the kind welcoming we received. As with tradition of The Watch Review Sites’ ‘Hands On Reviews’ we have a little gallery for you after the technical details below.

Christopher Ward C700 Grand Rapide Automatic Chronograph – Technical Data

Diameter: 42mm, Height/Thickness: 13.9mm,

Weight: 130g (Silicon rubber & Black Leather strap models) 209g (Steel bracelet model)

Case: 316L Stainless steel

Calibre: Eta Valjoux 7750

Vibrations: 28,800 per hour

25 Jewel Swiss automatic chronograph, Etachron regulator system

3 counter multi-function chronograph (hours, minutes and stop second)

Internal Tachymeter, Day/Date Calendar

Convex sapphire crystal with anti-reflective coating

Carbon Fibre Dial

SuperLuminova SLC1 Luminous indices and hands

Hand-polished surgical grade stainless steel case

Screw-in crown

Water resistant to 100m (10 atm)

Strap: Silicon Rubber with adjustable tongue buckle, Black Leather with adjustable quick release butterfly clasp or Steel with adjustable quick release butterfly clasp.

David Mason Watches DM1a & DM1b – Hands on Watch Review

Written by: D Constant for The Watch Review Site

We have been given the absolute pleasure in getting our hands on the inaugural David Mason Watches, the business is branded as David Mason London or sometimes DM London.

This young British watch brand/watchmaker has hit the market running with their first soiree into the watch world with two models the DM1a and DM1b an Oversized GMT Pilot Watch, both are solely available online from David Mason Watches direct at www.davidmasonwatches.co.uk  

So let us begin our Hands on Watch Review in great tradition, by thanking David Mason Watches and David himself for sending us both the DM1 GMT Pilot Watches for review. Regular followers of The Watch Review Site on Facebook and Twitter you would have had a sneak peek at the DM1a and DM1b over the last couple of weeks, if your not following us on Twitter please do so @WatchReviewSite you can also follow David Mason Watches on Twitter at @DMasonWatches 

Sorry for dragging that out a little, now onto the actual review, to start with this is mean’t to be an Oversized Pilot Watch, usually that means I’m weary to place it on my scrawny 6 1/2 inch wrists, yes only 6 1/2 inches… As the DM1a and b have a 46mm case diameter and 56mm in length or height from point to point (this being the two furthest points of the lugs) you would think that this watch will look ginormous on my wrists. I’ll let you decide (See photos below),  but in my personal opinion it actually fits surprisingly well, it is unobtrusive whether whilst wearing under the cuff or with casualwear, even with its 12mm under cuff depth the DM1’s still feel perfectly balanced.

Here is the customary wrist shot of the DM1B.

On to the watch, this is a typical Pilot Watch per-say, exactly what you would expect it has the classic Pilot Watch shaped case with the added benefits of GMT. The GMT function comes to us on the DM1A and DM1B as an additional 24 hour ring and red hand with separate crown to set a home town time whilst abroad, so you are always aware of the time in two timezones at once. We found the 24 Hour ring works very well and is simple to adjust and set.

Both watches have a solid construction and the stainless steel case and engraved case backs give these quartz watches a weighty substance on the wrist, They are not too heavy and lead you to easily forget you are wearing a watch on your wrist even, that is even though it is a large and substantial piece of outerwear. As I always say a watch should be comfortable, you should be able to forget that it’s on your wrist until you need it and the DM1A and DM1B GMT Pilot Watch does just that.

Of the two models we really don’t have a preference, the DM1A is an all black number which portrays a modern twist to the David Mason Oversized Pilot Watch and comes with a black face, off white luminous hands, markers and numerals for greater visibility in low light conditions. You also have a separate red 24 hour hand for use with the GMT function. The black against the stainless steel case and white thick stitching on the black strap all add to the watches visual prowess.

As for the DM1B, this is perfect with a summer suit and just has that little classic vintage feel to it, with its off-white edging toward cream dial, with black numerals and markers. Unlike the DM1A the 1B does not have lumin on the markers and numerals, so low light usage is really limited and that is even with luminous hour and minute hands. The brown or tan leather strap really sets off the David Mason DM1B Pilot Watch very well, but to make it really good the strap needs to be thicker and less new, i.e needs to be vintage leather, grainy and rugged.

Both Models have two crowns, the lower crown at 4 o’clock is for the sole use of the 24 Hour outer ring, which is bi-directional. The standard screw in crown at 3 o’clock controls the date, 24 Hour indication and hour & minute hands, it also bears the DM logo etched into it. The two crowns differ in looks, some people like this other despise it, I’m in the first camp on these watches it works to define the different functions of each crown. Whilst discussing the logo we see its presence on the case-back and buckle of both the DM1A and DM1B Oversized GMT Pilot Watches along with the crown.

As for the functionality of these David Mason DM1 Pilot Watches, along with the already disvussed 24 hour 2nd timezone function of the DM1A and DM1B, we also have a date window at 4 o’clock, large thick markers and oversized Arabic numerals at 3, 6 and 9 and instead of the 12 we have the David Mason logo. For me I may have included a large 0 or 12 instead of the logo and omitted it entirely from the dial of the watch. As you know from reading this review I have mentioned the logo some four times in previous paragraph or two, this may portray a feeling that it is ‘in your face’ and a little bit overkill. In reality, it is not in the slightest. It appears that David Mason has put some thought into the positioning of all the logos and it is uncommon to have two logos in view at the same time. So its very well planned and executed. But again not that it defers from the watch but personally I may have not had a logo on the dial.

Moving on, we always talk about the names of watches and to be honest DM1A and DM1B are not the most imaginative names for a watch. What it does do is what it says on the tin, DM for David Mason I presume and 1 for the first in hopefully an ever increasing range of David Mason Watches. The A and B denomination differentiates between the White dial and black dial watches and can be deemed to be model numbers. What has come to light is the confusion in this instance as the David Mason Watches website classifies the DM1A as the Black and DM1B as white faced version, whereas the casebacks differ in as much as the DM1A is the white face brown Strap (pictured above) and DM1B the black face and black strap. Note to David Mason himself, please rectify. One other thing on the name next time give us something more to talk about please.

The one thing I must take David to task on, is his choice of straps for both watches, not the fit of the strap but simply the feel. Yes, they are real leather and have the added feature of the contrasting white stitching, which is great. But the leather is too crisp, too shiny and too rigid for my liking, something a little softer with a bit more of a worn feeling and a little more malleable would be more to my liking. Maybe even an RAF/NATO Braided Strap could work well. As I mentioned before the strap on the DM1B or Brown Leather strap is actually a nicer strap but still a little too fresh for me, that’s all down to taste though.

The natural flow from the strap is to the buckle, this is a straight forward buckle and using it, is obviously simple. It is made of stainless steel with a small David Mason DM logo to the right and feels well constructed and solid, no spindly little hook here.

The caseback is stainless steel and is again engraved with the logo, watch model number i.e. DM1A and the customary water resistance rating, in this instance 10 atm or 100 meters. We alos have the unique numbered serial number which indicates this is a limited edition series of 100 timepieces for each model. 

To the heart of a watch and the last thing we need to look at is at on the David Mason Over-sized GMT Pilot Watch is the movement, well it is a Quartz movement made by Ronda a Swiss Quartz Wristwatch Movement manufacturer, David Mason opted to use the Swiss Parts Ronda 515 movement with GMT abilities, probably wouldn’t be my personal choice. As this is a Swiss Parts movement David Mason Watches cannot say that the DM1A and DM1B are Swiss Made, but the parts are the same parts as used in the Swiss Made Ronda 515 movement, what differentiates it is where it is constructed by Ronda outside of Switzerland, actually Ronda Swiss Parts movements are all constructed in Thailand.

I would have definately liked to see a Swiss Made movement, giving David the ability to market the watches as Swiss Made, but there may be a very good reason for this and we will follow that up in our interview with David in the next week or so…

The Ronda 515 is a True GMT movement and is a very good quartz movement, which is used in a number of more expensive mainstream timepieces, it consists of 1 jewel (for anyone that is interested) and has a battery life of 45 months, that’s a good 3 1/2 years before you have to consider getting the battery replaced, a simple job for any jeweller.

As we have mentioned, we will be undertaking an interview with the man behind David Mason Watches. If you have any questions you would like to put to him, please let us know through the comments box below. We are hoping to get the interview online on The Watch Review Site within the next two weeks (both parties schedules allowing). I will be asking him which watch is the DM1A and which is the DM1B as there seems to be some confusion, in this hands on watch review we have used the classification as per the website, but on the watches we had for review the caseback implies that they should be the other way around. This is a tiny niggle which can be easily rectified if need be by amending the website to match the caseback engravings.

The overall feel of the David Mason DM1A & DM1B GMT Pilot Watch is great, its well balanced, comfortable and fits very well on the wrist, anyone who has had the pleasure of purchasing one has got themselves a very nice watch that can be worn daily and for different occasions. When you add the fact that these watches are currently retailing via www.davidmasonwatches.co.uk  at a mere £120.00, yes you got it right only £120.00 and at that level I’ll be keeping one of these for myself I think…  Update September 2012 they are now £160.00 still cheap as chips…

One Last thing that makes owning either of the DM1A or DM1B David Mason Oversized GMT Pilot Watches is the fact that they are manufactured in a numbered limited edition of 100 pieces each. Yes a limited edition, weighty, nice, well built timepiece for only £120.00 at the price I really think you will be hard pushed to find anything better out there. It’s accepted you can get better automatic mechanical movement pieces, but they came in at a lot more than the David Mason DM1a & DM1b Oversized GMT Pilot Watch.

As with all our hands on watch reviews here at The Watch Review Site we have provided a little gallery of photos of the David Mason DM1a & DM1b Oversized GMT Pilot Watch after the technical details. 

 David Mason DM1A & DM1B Oversized GMT Pilot Watch – Technical Details

Ronda 515 Swiss parts movement, True GMT Movement

24 hour indication GMT hand , 3 hands (Hours, Minutes & Seconds), Date at 4 o’clock

24 hour ring activated by separate crown

Water resistance – 10 atm, 100m

Stainless steel case

Case Diameter – 46mm

Case Height – 56mm from two furthest lug points

Inner Lug to Lug width- 22mm

Case Back Stainless Steel, Unique engraved with DM Logo and individual serial numbers

Super-luminous hands

Screw-in crown and separate 24 hour GMT crown

Strap – DM1A – Black leather strap with nu-buck lining and thick stitching

Strap – DM1B – Light brown oil leather strap with nu-buck lining and thick stitching

Steel buckle with DM (David Mason) etched logo

Limited Edition of 100 numbered pieces of each DM1a and DM1b

Oh and here are some Photographs of the David Mason DM1a & DM1b GMT Oversized Pilot Watch